CBS (CZ) is an accelerator with high activity, high anti-scorching quality, processes safely and has a short cure time. Its activity can be reinforced by thiuram and dithiocarbamate type alkaline accelerators.

Used as a secondary accelerator with thiazoles and sulphenamides in NR and SBR compounds.

Sulphur vulcanizing agent for efficient vulcanization and semi-efficient vulcanization curing system. Provides heat/reversion/aging resistance in NR and synthetic rubbers. Non-blooming; excellent storage safety.

Used as an acid accelerator and a medium fast primary accelerator. Produces excellent aging properties in products when used both alone or in combination with MBTS, TMTD and many others basic accelerators for higher activity.

The product is an accelerator of NR and SR. It has an average cure rate and withstands higher vulcanization temperatures.

An excellent delayed accelerator. The performance is similar to Accelerator CZ, with better scorch safety. Widely used in NR, IR, SBR, NBR and EPDM.

Provides fast cure rate and high modulus development in NR, SBR, BR and blends. Normally used alone or with small quantities of ultra-accelerators in tire compounds or industrial rubber products.

TMTD is used as a vulcanization accelerator in the rubber industry. It is suitable for NR and SR. Mainly used to manufacture tires, rubber shoes, cables and other technical rubber products.

This product is a vulcanization accelerator, suitable for natural rubber, butadiene rubber, styrene butadiene rubber, nitrile rubber, butyl rubber and epdm rubber.

Used for primary or secondary ultra-accelerator in NR, IR, BR, SBR, NBR, HR, EPDM, and their latexes. Similar properties to Accelerator PZ and Accelerator EZ.

Used for NR, IR, SR, SBR, NBR, EPDM and their latexes. A fast curing primary or secondary effective ultra-accelerator for natural and synthetic latex formed compounds.

Used for NR, IR, SBR, NBR, EPDM and latex. May be regarded as a medium between Accelerator MBT and Accelerator MBTS.

Used for NR, IR, BR, SBR, NBR, HR, EPDM and natural & synthetic latexes. Stronger accelerating power than Accelerator TT. Strong resistance to scorching.

Secondary accelerator for NR, SBR, EPDM, and NBR. For rich sulphur content of 28%, it could be used as curing agent. In the system of SBR and NBR, it could be used as the primary cure agent.

It is a sulfenamide accelerator with excellent anti-scorching properties and delayed onset of curing.